What Type Of Paver Landscaping Project Did You Have In Mind?
- Do you have an existing paver patio or pool deck you'd like to have rebuilt or changed?
- Are you finally ready to design and build that beautiful new outdoor living space?
- Do you like the look of pavers and want to incorporate them into your landscape?
- Do you want to install a permeable paver driveway?
- Do you want to create some walkways or pathways to wind throughout your landscape?
Paver Patio Installation and Construction
- Paver patio installations
- Paver walkways and pathways
- Paver pool deck installations
- Paver driveway installations
- Outdoor cooking area construction
Preparing The Area For Your New Brick Or Paver Installation
Preparation is a huge (arguably the most important) part in building a great looking, long lasting paver landscaping feature. If the groundwork isn't completed properly before installing the pavers you're going to be unhappy with the results.
At A-Z Landscape & Maintenance we take the time to ensure our paver installations are completed to the manufacturers specifications. This ensures your new paver landscaping looks great, lasts a long time, and the pavers can qualify for the manufacturers warranty.
How Do We Prepare Your Ground For Pavers?
Installing paver patios, driveways, and walkways isn't rocket science but there are some very specific steps and processes that separate the good installations from the poor installations.
Step #1. The first thing we need to do is measure and mark the area where your pavers will be installed. Using a string line and stakes to mark the perimeter of the area, and spray paint or flags to mark the locations of any corners, curves, or other features.
Step #2. We will need to remove any existing vegetation or debris from the area so we have a clean slate. We then need to excavate the area to the desired depth for your specific pavers and the base materials we'll be using. This can vary depending on the pavers being used and other factors.
Step #3. Excavate the area to the desired depth. The depth of the excavation will depend on the thickness of the pavers and the height of any surrounding surfaces, such as a patio or walkway. Be sure to allow for the thickness of the base material and any sand or other materials that will be used to level the surface.
Step #4. We need to add base materials to the excavated area. This usually consists of a 6 inch layer or greater of 3/4" clean crushed limestone followed by 1 to 2 inch layer of 3/8" chipped gravel. The base establishes a solid footing for the pavers and provides drainage, while the 1 to 2 inch layer of 3/8" chipped gravel provides a level surface that can easily be adjusted as we install the pavers. Each layer must be compacted using a machine plate compactor to prevent future settling.
Step #5. We then install any necessary edging, including metal or concrete edging, as it's used to hold the pavers in place to define the edge of the paver area. Edging is installed around the perimeter of the paver area and is secured with stakes(for metal edging only) or other fasteners depending on the paver manufacturer.
Step #6. Install the pavers. We begin at one corner of the paver area and work our way outward, laying the pavers in a pattern that is consistent with your design. We use a rubber mallet to tap the pavers into place, and we use a level to ensure that the pavers are level and even. We can adjust the base layer as necessary to ensure everything is level. Lastly, we use polymeric sand by sealing off the paver joints. When it bonds it also prevents weed growth up through and burrowing insects from the top.
As you can see, by spending the extra time on site preparation, you're getting a superior installation that will last and look good for many years to come.
How Our Paver Patio Construction Process Works
- We start with our initial consultation and discuss your design ideas and what you'd like to incorporate.
- We determine the surface area of your project. (this is to determine material requirements)
- We take into account any specific challenges your property might pose for our team.
- We consult with you on the specific paver materials you’d like.
- We’ll provide you with an accurate written estimate for the work.
The amount of work required for this type of landscaping project can vary greatly from property to property dependent on many factors. The slope of your property, existing site and soil conditions, drainage, size and scope of the project, the particular materials being used, and your budget will all be considered. We’ll be able to offer you an accurate estimate only after an initial site visit and material consultation.
